Digital Bursting Strenght Tester
型号PTE010
破裂强度试验机的设计找到bursting strength of fabric/leather/paper/paper board. A test specimen is held between two annular clamps under sufficient pressure to minimize slippage. The upper clamping surface which is in contact with the test specimens has a continuous spiral grooves. The upper clamping surface move up and down by an electro-pneumatic system. The clamping force may be adjusted by adjusting the pressure of pneumatic system with the help of pressure gauge and pressure regulator. A circular diaphragm of pure gum rubber is clamped between the lower clamping plate & pressure cylinder so that before the diaphragm is stretched by pressure underneath it the center of its upper surface is below the plane of the clamping surface.
Technical Details:
Specification
|
模型/容量 |
Maximum Capacity |
50千克/厘米 |
Least Count |
0..1 kg /cm² |
在上层夹开口 |
直径30.5毫米 |
Opening in lower clamp |
38.1 mm diameter |
Rate of fluid displacement |
95 CC /分钟 |
Test fluid |
Glycerin |
Gear Box |
Worm reduction type
|